Stag_Plate-1012
Here is the next installment of the images I worked on over the holiday break. Exposure continues to be a challenge. By going to the gallery you can compare this image to one I took earlier. The first image is rather badly overexposed, the second one (above) I was happy with.
Daguerreotype Process | andy | January 17, 2010
Courtesy Lib. of Congress
Today is (more or less) the day that in 1839 saw the public announcement of the daguerreotype process. Thank you Louis and Joseph!
Having some time off from work. Have created what (I hope!) are the final cutting templates for the stainless steel dag plate project. Also picked up an odd Packard type shutter on e-Bay that I may try to replicate in acrylic. Also spending some time on finalizing the sixth plate camera and experimenting with creating [...]
Two straight days of prepping plans for laser cutting. Steel plate cutting templates, lens mounts and film holder mounts for the B&J 8×10 and some experimental 35mm plate holders made out of 1/32 ABS. Not quite done, but should be good to go when Pagoda Arts reopens after vacation time. A great leap forward.
Did a dry run today of the new plate cutting templates at Tech Shop. Ran into some problems with the first cut and had to back off on the production run. Need to make some template adjustments. The good news is that the cutting is three times as precise as it needs to be. Finished [...]
Have been slowly moving forward with my experiment to create stainless steel based plates. Today I plan to finalize the cutting templates so I can cut up the 1′x2′ piece I had plated. The plan is to use 1/16″ acrylic laser-cut templates to guide the cutting on the 40″ hydraulic shear at TechShop. The real [...]
Archive for Dag Diary »